Xerox C60/PrimeLink C9070 Toner Replacement & Cleaning Guide

Proper maintenance is key to ensuring your Xerox C60 or PrimeLink C9070 printer functions optimally. Regular cleaning and toner replacement are essential tasks that keep your machine in top condition, preventing downtime and improving performance. Follow this detailed guide to safely replace and clean the toner unit.

Step 1: Removing the Toner Unit

The first step is to remove the toner unit. This process involves disassembling specific components to access the unit safely.

1. Remove All Toner Cartridges: Begin by removing all toner cartridges to ensure you can work without obstruction.

2. Unscrew Key Screws: Locate four screws near the toner unit:

   • Two screws at the front.

   • Two additional screws within recessed holes.

3. Disconnect Cables: Carefully disconnect any attached USB or power cables.

4. Lift the Unit Out: Once all screws are removed, gently lift the unit out, taking care not to damage any internal components.
   

Step 2: Cleaning the Unit

Cleaning the toner unit is a meticulous process but essential for maintaining print quality and extending the life of your printer.

1. Open the Unit: Use a flathead screwdriver to open the unit. Ensure you carefully detach any obstructing plastic components.

2. Vacuum the Interior: Remove accumulated toner dust using a vacuum cleaner designed for electronics. Pay special attention to avoid damaging delicate components.

3. Clean Sensors: Use compressed air to gently clean any sensors or metallic elements inside the unit. Ensure you handle these parts with care to prevent damage.
   

Step 3: Reassembling the Unit

After completing the cleaning process, reassemble the unit by reversing the disassembly steps.

1. Dry and Inspect Components: Ensure all cleaned parts are thoroughly dried and free of toner residue.

2. Reconnect Cables and Screws: Securely reconnect all cables and screws in their original positions.

3. Test for Proper Functionality: Before fully closing the printer, perform a quick functionality check to confirm everything is securely in place.
   

   
   

Tips for Safe Maintenance

• Use Proper Tools: Always use the appropriate tools, such as a flathead screwdriver and an electronics-friendly vacuum.

• Handle with Care: Be gentle with all parts, especially cables and sensors, to avoid unnecessary damage.

• Regular Maintenance: Incorporate toner replacement and cleaning into your routine maintenance schedule to prolong the life of your printer.